discount hardware,tools for repairing american made motorcycles page 2 island choppers

AXLE PLATE $14.95 EA. Custom frame builders can save time & cost by using these Ultima cast steel rear axle plates. These are the same high quality axle plates which have been used for the Ultima 250 tire frames. Precision CNC machined for use with 1” axle. 3k/8-16 hidden axle adjuster. Fender support bracet. SOLD EACH #3100 Axle Plate2 Quantity:	ULTIMA TORQUE PLATES $94.95 EA. With a wide range of sizes and built with versatility in mind, these Ultima torque plates are available from 3.875” all the way up to 4.40”. These heat treated ductile iron torque plates are a must have item for any serious service shop. Used to prevent distortion in your cylinders by using torque plates to simulate head bolt stress and draw cylinders into their operating shape before boring or honing. Ear can be drilled for use on most honing fixtures/boring fixtures or can be used to mount in a vice. Comes with all necessary hardware. SOLD EACH #97351 4.125” Bore. Quantity: #97353 4.400” Bore.	CAM CHAIN TENSIONER TOOL $49.95 EA. This tool will unload the pressure on the primary and secondary chain tensioners to assemble and disassemble cams. This tool also checks spring loads on chain tensioners. #97237 For use on all Twin Cam 88™. SOLD EACH
CAM SHAFT REMOVER AND INSTALLER $199.95 EA. This multi-function tool will remove and replace front and rear camshafts and the ball bearings in the new Twin Cam 88™. It provides the precision alignment of the cam shaft to insure a smooth press in and out of the support plate. #97239 For use on all Twin Cam 88™. SOLD EACH	INNER CAM BEARING REMOVER TOOL $189.95 EA. Designed like their popular Evolution® cam bearing tool, it removes the bearing easily without any damage to the crankcase. This precision built tool will also keep the pin rollers from accidentally falling into the crankcase. #97240 For use on all Twin Cam 88™. SOLD EACH	INNER CAM BEARING INSTALLER $189.00 EA. This tool will install the two inner cam needle bearings on Twin Cam 88™. It perfectly aligns to the shaft bores for a precision press fit. #97241 For use on all Twin Cam 88™. SOLD EACH
FORK SEAL DRIVER $89.95 EA. This custom designed fork seal driver is a really must have tool. It eliminates all unwanted scratches on fork tubes during installation of replacement fork seals. The unique design has protective bushings fitted inside the tool at both ends. These internal protective bushings guide the tool into place without scratching the fork tubes, even when using show chromed tubes. (Repl. bushing HD#45940-84) The tool will drive both the upper bushing and se5.8al at the same time when forks are apart or can replace just the seal only as needed. #97387 Custom fork seal driver tool w/protective bushings. SOLD EACH	CAM INSTALLATION TOOL $49.99 KIT The tool comes with easy instructions for the owner, or mechanic, to install Crane’s adjustable pushrods without removing the gas tank or rocker covers. In all FL/FX engines with adjustable pushrods, Crane’s new tool makes it quick & easy to make cam changes. No longer do you have to remove pushrods, pushrod covers, tappets, or tappet guides. #9750 Cam installation tool for Big Twin 1948 & later. SOLD AS KIT	CAM GEAR ALIGNMENT TOOL $269.00 EA. This tool is designed to index the cam gear’s position while removing or installing the cam gear. This tool will allow you to accurately position and/or reposition the cam gear from one camshaft to another, as well as allow you to retard or advance the gear’s position by up to 10 degrees with the accuracy of 1/4 degree. #97284 Use on all single cam 1970 thru 1999. SOLD EACH
MECHANICS’ STETHOSCOPE $28.77 Great tool to locate problem engine noises. Includes long probe. #97276 Mechanics’ stethoscope. SOLD EACH	TAPPET BLOCK ALIGNMENT TOOL $12.95 EA. Late 1977 & later H-D® Big Twins’ (including Evolution®) tappet blocks don’t have counterbored bolt holes. Therefore, whenever one of these tappet blocks is removed (or even loosened) it should be reinstalled using an alignment tool to insure that the lifters track properly on the cam shaft. This tool makes the process quick & easy, insuring the durability of your installation. #9761 Tappet block alignment tool. SOLD EACH	TAPPET HOLDER TOOL $42.41 EA. This U.S.A. MADE tool was designed to hold the tappets in place when installing the blocks or replacing a cam. Made from 6061-T6 aluminum with industrial strength magnets and powder coated. You must use two tools for cam installation. #97149 Tappet holder tool. SOLD EACH
SPROCKET SHAFT SEAL INSTALLING TOOL $120.95 EA. Use to press oil seal over sprocket shaft into case. Use with sprocket shaft bearing installing tool part No. 97-95. #9786 For Big Twin 1969 & later. SOLD EACH	PUSHROD COVER TOOL $41.95 EA. Used to compress the pushrod cap for installation and removal of the retainer. For use on all H-D® models. #97256 Pushrod retainer tool. SOLD EACH	TIMKEN® BEARING REMOVER $199.95 EA. Used to remove Timken® bearing from sprocket shaft without removing shaft from flywheels. 97D158 Fits Big Twin 1955 & later. SOLD EACH
PISTON RING TOOLS $160.95 KIT Quick change design speeds piston ring installation and increases production. The Ring-O-Matic pliers and bands are designed to operate in all positions , not just vertically or horizontally. Pliers incorporate precision locking action for exact holding and quick release. #97270 Ring-O-Matic Kit. Contains pliers and six bands; sizes range from 2-7/8” thru 4-3/8”. SOLD AS KIT	ALUMINUM VISE INSERT $24.98 SET Provides a safe way to hold small suspension shafts & fittings securely without damage — perfect for suspension overhauls! Magnetic strips attach to vise jaws for easy, trouble free use. SOLD AS SET #97301 Heavy duty aluminum jaws have 3 machined openings to hold shafts from 7mm to 15mm.	STEERING HEAD CUP REMOVER $29.91 EA. The Park Took head cup remover makes steering head bearing race/cup removal simple. The tool is pulled through the steering tube until the flared ends snap in behind the race/cup. A hammer strike on the tool head removes the race/cup. Now there is no reason to damage another race. Spring blades fit most brands with 35-55 mm races. Made in USA. #97361 Steering head cup remover SOLD EACH
PISTON RING GAPPING TOOL $176.76 EA.This clever little hand operated grinder will allow the engine builder to custom tailor the end gaps of his rings for tighter fit and a more complete combustion seal. #97143 Gapping tool. SOLD EACH	CLUTCH HUB PULLER $16.95 EA. Eliminates the need to remove kickstart cover when removing clutch hub. 97D3 Fits all Big Twins 1941 thru 1983, including hubs with 10 long studs. SOLD EACH\	OIL PRESSURE SWITCH WRENCH $12.87 EA. Use extension for Big Twin Evolution®, for Sportster® 1983 & 1984, use without extension (short). #97106 Wrench. OEM 34816. SOLD EACH
STEERING HEAD CUP/RACE PRESS $160.67 EA. The Headcup Press easily and accurately presses steering head races, and select other applications, eliminating damaged or misaligned races/cups; dented and chipped frames. Our unique design permits quick release after races are seated. Multiple bushings provide a precise fit and alignment for most brands and, like all other Park Tools, has a limited lifetime warranty. #97360 Head cup/race press SOLD EACH	MAINSHAFT BEARING RACE TOOL $183.87 EA. Use to remove and install the bearing inner race on the trans mainshaft. #9785 For Big Twin late 1984 & later. SOLD EACH	WHEEL BEARING RACE REMOVER $92.98 EA. & INSTALLER TOOL Use to remove and install bearing cups in cast wheels. Use with handle part No. 97-83. #9782 For Big Twin & Sportster®, 1973 & later. SOLD EACH
SHOCK WRENCH $10.08 EA. #9720 H-D® shock absorber adjusting wrench for SOLD EACH 1975 thru 1981 XL with Showa-style shock. OEM 94820-75.	UNIVERSAL SPOKE WRENCH $6.40 EA. Fits six popular sizes for motorcycle. #974 SOLD EACH	PRIMARY CHAIN ALIGNMENT TOOL $28.85 EA. For primary chain alignment. For aligning the teeth on the clutch shell with the teeth on the motor sprocket. Quick and easy to use. Eliminates the need for taking multiple measurements. Time saver. For use with Evo-type engines. #97364 Primary chain alignment tool. SOLD EACH
PORTABLE MOTORCYCLE $65.18 EA. TIRE BEAD BREAKER This is a great tool for the home work shop or the touring enthusiast. It will break the bead on any motorcycle wheel that is open in the middle. It can not be used on solid wheels. The tool breaks down for easy storage in saddlebags or bed roll. USA. MADE. Includes instructions. 97D207 Motorcycle tire bead breaker. SOLD EACH	5-SPEED DOOR PULLER $97.48 EA.The 5 speed door puller is used to remove the Big Twin five speed transmission door. This tool easily removes the transmission door, while leaving gears and shafts attached, without any scratches or frustrations. The puller will not damage the door bearing. #97190 For Big Twin 1980 & later 5 speed transmission doors. SOLD EACH	CHAIN BREAKING/RIVETING TOOL $84.56 EA.This tool is designed to rivet chain links to form an endless chain. May be used on cam chains or drive chain. Tool may also be used to break chain by pushing pin out. The tool kit comes complete with a heavy duty storage case. #97139 Chain breaking/riveting tool kit. SOLD AS KIT

AXLE PLATE $14.95 EA.
Custom frame builders can save time & cost by using these Ultima cast steel rear axle plates. These are the same high
quality axle plates which have been used for the Ultima 250 tire frames. Precision CNC machined for use with 1” axle.
3k/8-16 hidden axle adjuster. Fender support bracet. SOLD EACH
#3100 Axle Plate2

ULTIMA TORQUE PLATES $94.95 EA.
With a wide range of sizes and built with versatility in mind, these Ultima torque plates are available from 3.875” all
the way up to 4.40”. These heat treated ductile iron torque plates are a must have item for any serious service shop.
Used to prevent distortion in your cylinders by using torque plates to simulate head bolt stress and draw cylinders
into their operating shape before boring or honing. Ear can be drilled for use on most honing fixtures/boring fixtures
or can be used to mount in a vice. Comes with all necessary hardware. SOLD EACH
#97351 4.125” Bore.

#97353 4.400” Bore.

CAM CHAIN TENSIONER TOOL $49.95 EA.
This tool will unload the pressure on the primary and secondary chain tensioners to assemble and disassemble cams.
This tool also checks spring loads on chain tensioners.
#97237 For use on all Twin Cam 88™. SOLD EACH

CAM SHAFT REMOVER AND INSTALLER $199.95 EA.
This multi-function tool will remove and replace front and rear camshafts and the ball bearings in the new Twin
Cam 88™. It provides the precision alignment of the cam shaft to insure a smooth press in and out of the support
plate.
#97239 For use on all Twin Cam 88™. SOLD EACH

INNER CAM BEARING REMOVER TOOL $189.95 EA.
Designed like their popular Evolution® cam bearing tool, it removes the bearing easily without any damage to the
crankcase. This precision built tool will also keep the pin rollers from accidentally falling into the crankcase.
#97240 For use on all Twin Cam 88™. SOLD EACH

INNER CAM BEARING INSTALLER

$189.00 EA.
This tool will install the two inner cam needle bearings on Twin Cam 88™. It perfectly aligns to the shaft bores for a precision press fit.
#97241 For use on all Twin Cam 88™.

SOLD EACH

FORK SEAL DRIVER $89.95 EA.
This custom designed fork seal driver is a really must have tool. It eliminates all unwanted scratches on fork tubes
during installation of replacement fork seals. The unique design has protective bushings fitted inside the tool at
both ends. These internal protective bushings guide the tool into place without scratching the fork tubes, even
when using show chromed tubes. (Repl. bushing HD#45940-84) The tool will drive both the upper bushing and
se5.8al at the same time when forks are apart or can replace just the seal only as needed.
#97387 Custom fork seal driver tool w/protective bushings. SOLD EACH

CAM INSTALLATION TOOL $49.99 KIT

The tool comes with easy instructions for the owner, or mechanic, to install Crane’s adjustable pushrods without
removing the gas tank or rocker covers. In all FL/FX engines with adjustable pushrods, Crane’s new tool makes it
quick & easy to make cam changes. No longer do you have to remove pushrods, pushrod covers, tappets, or tappet
guides.
#9750 Cam installation tool for Big Twin 1948 & later. SOLD AS KIT

CAM GEAR ALIGNMENT TOOL $269.00 EA.
This tool is designed to index the cam gear’s position while removing or installing the cam gear. This tool will allow
you to accurately position and/or reposition the cam gear from one camshaft to another, as well as allow you to
retard or advance the gear’s position by up to 10 degrees with the accuracy of 1/4 degree.
#97284 Use on all single cam 1970 thru 1999. SOLD EACH

MECHANICS’ STETHOSCOPE $28.77
Great tool to locate problem engine noises. Includes long probe.
#97276 Mechanics’ stethoscope. SOLD EACH

TAPPET BLOCK ALIGNMENT TOOL $12.95 EA.
Late 1977 & later H-D® Big Twins’ (including Evolution®) tappet blocks don’t have counterbored bolt holes.
Therefore, whenever one of these tappet blocks is removed (or even loosened) it should be reinstalled using an
alignment tool to insure that the lifters track properly on the cam shaft. This tool makes the process quick & easy,
insuring the durability of your installation.
#9761 Tappet block alignment tool. SOLD EACH

TAPPET HOLDER TOOL $42.41 EA.
This U.S.A. MADE tool was designed to hold the tappets in place when installing the blocks or replacing a cam.
Made from 6061-T6 aluminum with industrial strength magnets and powder coated. You must use two tools for
cam installation.
#97149 Tappet holder tool. SOLD EACH

SPROCKET SHAFT SEAL INSTALLING TOOL $120.95 EA.
Use to press oil seal over sprocket shaft into case. Use with sprocket shaft bearing installing tool part No. 97-95.
#9786 For Big Twin 1969 & later. SOLD EACH

PUSHROD COVER TOOL $41.95 EA.
Used to compress the pushrod cap for installation and removal of the retainer. For use on all H-D® models.
#97256 Pushrod retainer tool. SOLD EACH

TIMKEN® BEARING REMOVER $199.95 EA.
Used to remove Timken® bearing from sprocket shaft without removing shaft from flywheels.
97D158 Fits Big Twin 1955 & later. SOLD EACH

PISTON RING TOOLS $160.95 KIT Quick change design speeds piston ring installation and increases production. The Ring-O-Matic pliers and bands
are designed to operate in all positions , not just vertically or horizontally. Pliers incorporate precision locking
action for exact holding and quick release.
#97270 Ring-O-Matic Kit. Contains pliers and six bands; sizes range from 2-7/8” thru 4-3/8”. SOLD AS KIT

ALUMINUM VISE INSERT $24.98 SET
Provides a safe way to hold small suspension shafts & fittings securely without damage — perfect for suspension
overhauls! Magnetic strips attach to vise jaws for easy, trouble free use. SOLD AS SET
#97301 Heavy duty aluminum jaws have 3 machined openings to hold shafts from 7mm to 15mm.

STEERING HEAD CUP REMOVER $29.91 EA.
The Park Took head cup remover makes steering head bearing race/cup removal simple. The tool is pulled through
the steering tube until the flared ends snap in behind the race/cup. A hammer strike on the tool head removes the
race/cup. Now there is no reason to damage another race. Spring blades fit most brands with 35-55 mm races.
Made in USA.
#97361 Steering head cup remover SOLD EACH

PISTON RING GAPPING TOOL $176.76 EA.This clever little hand operated grinder will allow the engine builder to custom tailor the end gaps of his rings for
tighter fit and a more complete combustion seal.
#97143 Gapping tool. SOLD EACH

CLUTCH HUB PULLER $16.95 EA.
Eliminates the need to remove kickstart cover when removing clutch hub.
97D3 Fits all Big Twins 1941 thru 1983, including hubs with 10 long studs. SOLD EACH\

OIL PRESSURE SWITCH WRENCH $12.87 EA.
Use extension for Big Twin Evolution®, for Sportster® 1983 & 1984, use without extension (short).
#97106 Wrench. OEM 34816. SOLD EACH

STEERING HEAD CUP/RACE PRESS $160.67 EA.
The Headcup Press easily and accurately presses steering head races, and select other applications, eliminating
damaged or misaligned races/cups; dented and chipped frames. Our unique design permits quick release after
races are seated. Multiple bushings provide a precise fit and alignment for most brands and, like all other Park
Tools, has a limited lifetime warranty.
#97360 Head cup/race press SOLD EACH

MAINSHAFT BEARING RACE TOOL $183.87 EA.
Use to remove and install the bearing inner race on the trans mainshaft.
#9785 For Big Twin late 1984 & later. SOLD EACH

WHEEL BEARING RACE REMOVER $92.98 EA.
& INSTALLER TOOL
Use to remove and install bearing cups in cast wheels. Use with handle part No. 97-83.
#9782 For Big Twin & Sportster®, 1973 & later. SOLD EACH

SHOCK WRENCH $10.08 EA.
#9720 H-D® shock absorber adjusting wrench for SOLD EACH
1975 thru 1981 XL with Showa-style shock. OEM 94820-75.

UNIVERSAL SPOKE WRENCH $6.40 EA.
Fits six popular sizes for motorcycle.
#974 SOLD EACH

PRIMARY CHAIN ALIGNMENT TOOL $28.85 EA.
For primary chain alignment. For aligning the teeth on the clutch shell with the teeth on the motor sprocket. Quick
and easy to use. Eliminates the need for taking multiple measurements. Time saver. For use with Evo-type
engines.
#97364 Primary chain alignment tool. SOLD EACH

PORTABLE MOTORCYCLE $65.18 EA.
TIRE BEAD BREAKER

This is a great tool for the home work shop or the touring enthusiast. It will break the bead on any motorcycle wheel
that is open in the middle. It can not be used on solid wheels. The tool breaks down for easy storage in saddlebags
or bed roll. USA. MADE. Includes instructions.
97D207 Motorcycle tire bead breaker. SOLD EACH

5-SPEED DOOR PULLER $97.48 EA.The 5 speed door puller is used to remove the Big Twin five speed transmission door. This tool easily removes the
transmission door, while leaving gears and shafts attached, without any scratches or frustrations. The puller will
not damage the door bearing.
#97190 For Big Twin 1980 & later 5 speed transmission doors. SOLD EACH

CHAIN BREAKING/RIVETING TOOL $84.56 EA.This tool is designed to rivet chain links to form an endless chain. May be used on cam chains or drive chain. Tool
may also be used to break chain by pushing pin out. The tool kit comes complete with a heavy duty storage case.
#97139 Chain breaking/riveting tool kit. SOLD AS KIT

PJ1 HEAVY DUTY CHAIN LUBE Super tacky formula won’t fly off. Extends chain and sprocket life. Prevents rust and corrosion. Ideal for on/off road applications. #10315 8 Ounce can. $7.36 EACH #10316 20 Ounce can. $13.17	PJ1 BLUE LABEL™ O-RING CHAIN LUBE Super tacky formula won’t fly off. Extends chain and sprocket life. Prevents rust and corrosion. Ideal for on/off road applications. #10317 8 Ounce can. $7.39 SOLD EACH	PJ1 SUPER CLEANER™ Great for all preassembly of motor, surface preparation for paint, decals and grip installation. Cleans carburetors, injector systems, disc brake rotors, pads, brake shoes, spark plugs, electrical switches…Everything! Removes moisture from ignition systems. Harmless to most plastics and paint. #10329 13 oz can. $7.75 SOLD EACH
PJ1 SPRAY FABRIC FILTER OIL For gauze type air filters. Filters out dirt and sand. Water repelling. Makes engine breathe more efficiently. #10314 15 oz can. $7.84 SOLD EACH	PJ1 FORK TUNER™ OIL Three different multi-viscosity weights for precise tuning. Consistent smooth damping action for more predictable ride in summer or winter temperatures. Fine tune your ride to your personal preference. Contains preservative to prevent messy seal leaks. Non-fading, non-foaming formula. 16 Ounce bottle. SOLD EACH #10354 Light; SAE 15W. $7.50 #10355 Medium; SAE 20W. $7.48	HIGH PERFORMANCE THREAD SEALANT $14.99 EA. OEM specified. Formulated specifically for metal, tapered pipe thread fittings, High Performance Thread Sealant replaces Teflon® tape and pipe dopes. Cures rapidly to withstand 10,000 PSI. Perfect as a replacement for Vibra- Seal® pre-coated parts. Prevents galling and protects mated threaded areas from rust and corrosion. #103720 50 ml tube, carded. SOLD EACH
COLD WELD BONDING COMPOUND $6.63 EA. A fifteen minute, two-part adhesive and filler system that eliminates the need for welding or brazing. Once cured, it can be drilled, sanded, painted, or filed. Resists most automotive, shop, and cleaning fluids. Withstands temperature to 300°F intermittent. Over 3,000 PSI shear strength on steel. Suggested applications: aluminum, steel, brass, bronze, castings, and stampings. #103812 Cold Weld Bonding Compound. Two 1 oz Tubes. SOLD EACH	FAST BREAK® SUPER PENETRANT $4.48 EA. Heavy duty penetrant for rusted and frozen assemblies. Works quickly to penetrate and loosen rust, tar, grease, dirt, carbon deposits, and corrosion from metal parts. Frees frozen nuts, bolts, and fittings in all types of assemblies. Suggested application: lubricates to free any corroded or seized part. Penetrates rust, scale, paint varnish carbon, or gum. OEM 98958-97. #103703 Fast Break® Super Penetrant. 16 oz. aerosol can, 12 oz. net wt. SOLD EACH	ANTI-SEIZE LUBRICANT A highly refined blend of aluminum, copper, and graphite lubricants. Use during assembly to prevent galling, corrosion, and seizing, and to assure easier disassembly. Temperature range: -60°F to 1600°F. Salt, corrosion and moisture resistant. Suggested applications: for easy removal of spark plugs, cylinder head and exhaust head bolts. #103712 Anti-Seize Lubricant. 1 oz. Tube. $4.38 SOLD EACH #103723 Anti-Seize Lubricant. 8oz. Brush Bottle. $7.50 SOLD EACH Quantity:
DIELECTRIC TUNE-UP GREASE $4.30 EA. Protects electrical connections and wiring from salt, dirt, and corrosion. Extends the life of bulb sockets. Prevents voltage leakage around any electrical connection. Also prevents spark plugs from fusing to boots. OEM Specified for use on high energy ignitions. Suggested applications: electrical connections, spark plug boots, and battery terminals. #103722 Dielectric tune-up grease. .33 oz. Tube. SOLD EACH	MOTOSEAL® 1 ULTIMATE GREY GASKET MAKER $6.59 EA. Resists gasoline and other damaging fluids. Withstands temperatures 350°F (177°C) continuous, 400°F (204°C) intermittent. Suggested applications: Cylinder head top covers, transmission center & end covers, crank case halves, transmission case halves, exhaust manifold seals, timing chain cases, cylinder case halves, side covers, and clutch housings. #103711 MotoSeal® 1 Ultimate grey gasket maker. 2.7 oz. Tube. SOLD EACH	CLEAR RTV SILICONE ADHESIVE SEALANT $5.13 EA. General purpose, clear RTV indoor/outdoor sealant. Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, and weather stripping. Protects and repairs electrical wiring. May be applied to horizontal or vertical surfaces. Waterproof and flexible. Temperature range of -75°F to 400°F; resists oil, water, weather, vibration and grease. Suggested applications: Windshields, electrical connections, and seams. #103702 Clear RTV Silicone. 3 oz. Tube. OEM 99814-97. SOLD EACH
PERMATEX HYLOMAR UNIVERSAL GASKET DRESSING $17.26 EA. Features include: • Non hardening and non setting. • Unblimited assemblyh time. • Vibration resistant. • Withstands rapid variation in temperature. • Allows metal to metal contact. • Resistant to combustion products. #103719 Hylomar universal blue racing formula gasket dressing SOLD EACH	“PRO-STYLE” VINYL & LEATHER REPAIR KIT $19.85 EA. A compete professional kit with plug-in electric heat iron to make pro-style repairs. Contains: professional electric heat tool, seven OEM color compounds, clear vinyl adhesive and filler (net .34 fl. oz.), grain pattern paper, metal spatula, plastic dashboard hardening powder. Suggested applications: vinyl and leather upholstery, dashboards, vinyl tops, and luggage. #103816 “Pro-Style” Vinyl & Leather Repair Kit. SOLD EACH Quantity:	THREEBOND TB121 SILICONE LIQUID GASKET $19.63 EA. ThreeBond 1211 Silicone Liquid Gasket is a tough, durable sealer utilizing silicone rubber as a primary component. White in color, it solventless, semi-drying and visco-elastic properties make it ideal for numerous applications where a long-lasting, faultless seal is absolutely critical. As Silicone Liquid Gasket comes in contact with air, it forms a rubberized elastic mass impervious to vibrations and impacts. Can be applied to flange surfaces and screw sections to prevent water, oil, gasoline, and chemical leaks. Perfect for sealing complex three-point surfaces of cylinder blocks, chain cases and oil pans. 100% Effective over wide temperature range — 60°C to 250°C. Tack-free in 90 minutes, fully cured and bonded within 24 hours; attains optimum strength in three days. #10378 ThreeBond TB1211 Silicone Liquid Gasket. SOLD EACH
THREEBOND SEAL ‘N’ AIR FOR TUBE/TUBELESS TIRES $8.17 EA. Effective, temporary flat tire repair requiring no tools. For best results, foreign object should be removed before inflating. Inflates tire to moderate pressure in only 20 seconds. Not effective for large holes or sidewall punctures. Works at temperatures 23°F and above. For temperatures below 23°F, container may be warmed with hands (but not with flame) before using. #10364 ThreeBond Seal ‘N’ Air. SOLD EACH		THREEBOND THREAD LOCK PRODUCTS ThreeBond’s Thread Lock line-up includes high strength retaining properties for various threads, screws, bolts, bearings, piping joints, gears, pulleys, fans, and studs which are not frequently removed, and must remain secure for safety and/or structural integrity reasons. ThreeBond Hi Temperature Thread Lock is a new sealing and locking agent made to withstand extreme temperatures without weakening. It incorporates the various strengths of anaerobic locking agents, plus a heat-resistant element capable of withstanding 200°C, which makes it ideal for sealing engine and exhaust components. At the bottom end of the range, ThreeBond’s Low Strength/Frequent Repair product is perfect for small screws and bolts which are frequently removed, and require a force of only 10 - 20% greater than that used for tightening. All ThreeBond Thread Lock products inhibit the development of leaks and rust, and are not affected by oils, chemicals, various gasses, salt water or organic solvents. Low strength (Blue) Frequent Repair. 103D85 10 ml Bottle. $3.17 SOLD EACH Quantity: 103D87 50 ml Bottle. $9.57 Quantity: Medium strength (Red) Bearing & Stud. 103D82 10 ml Bottle. $3.17 SOLD EACH 103D88 50 ml Bottle. $9.86 Medium strength (Red) High Temperature. 103D83 10 m1l Bottle. $3.17 SOLD EACH Medium strength (Red) High Temperature. 103D89 50 ml Bottle. $9.86 Quantity: High strength (Green) Retaining. 103D84 10 ml Bottle. $3.17 SOLD EACH High strength (Green) Retaining. 103D90 50 ml Bottle. $9.86
KLEER CHROME ULTRA $14.62 EA. Premium polish designed to remove and prevent oxidation, guard against water spots and maintain luster. Works on chrome, aluminum and stainless steel. #103139 Kleer Chrome Ultra, 8 oz. SOLD EACH	ULTIMA D.O.T. 5 BRAKE FLUID $9.76 EA. Silicone based DOT 5 brake fluid is specified for use in H-D® brake systems. Ultima® DOT 5 brake fluid is designed for severe service applications and will not boil at temperatures up to 500°F. Will not absorb moisture. Premium quality at at budget price! #103197 Ultima® DOT 5 brake fluid, 12 ounces. BEST PRICE BREAK — CASE OF 12 EACH SOLD EACH call for price
PIG SPIT® FAST DETAIL $8.11 EA. Pig Spit® Fast Detail works on contact to remove some of the toughest road grime, mud, grease, bugs and any other dirt and debris typically found on your motorcycle after a good long ride. Aerosol. #103122 Pig Spit® Fast Detail, 4 oz can. SOLD EACH PIG SPIT® GLASS PLEXI $8.11 EA The fast and easy way to clean all of thee glass, plexi and plastic surfaces on your motorcycle. Simply spray on and wipe off. Plexiglas® is a registereed trade name of Arkema. Aerosol. #103123 Pig Spit® Glass Plexil, 4 oz can. SOLD EACH
EZE BLEEDER $19.16 EA.Save time and money using the EZE Bleeder. Bleed air from the brake system by starting at the low points. Inject brake fluid into the caliper in its natural direction up to the the master cylinder. Instructions included. #97208 EZE Bleeder. SOLD EACH
ULTIMA PREMIUM BLEND STRAIGHT WEIGHT ENGINE OILS Ultima Engine Oils have been specifically engineered to provide protection for all 4 Stroke Engines even in the most extreme temperature environments. Ultima Oils carry one of the best Anti wear packages available for maximum performance and longer engine life. All of our Premium Blend motor oils are produced using “severe hydro-cracked” low volatility base oils. This process produces base oils that are as clear as water, provide high natural resistance to oxidation and thermal breakdown; resist sludge formation and combat corrosive acids from fuel combustion better than less expensive hydro-treated base oils. Straight weight Motor Oils are recommended for use in Engines where higher ambient temperatures are experienced and in older cast iron cylinder engines requiring high thermal stability. Exceeds all known motorcycle manufacturers warranty requirements including API SF,SG,SH,SL and JASO MA and does not void new vehicle warranty. Check manufacturer’s recommendation for viscosity and change interval. 103110 Ultima Oil 50W $6.61 SOLD EACH/CASE BOX IS 12PC 103111 Ultima Oil 60W $6.61 103112 Ultima Oil 70W $6.61	ULTIMA RACING 20W50 FULL SYNTHETIC $11.87 EA. Ultima Racing 20W50 motor oil is a full synthetic olefin-ester based oil specifically engineered to provide protection during extreme service conditions where conventional oils fail. This extreme performance multigrade motor oil should be used in all 4 Stroke engines where maximum service life and top performance are required and expected. This oil will maximize power transfer performance, provide critical protection against ring wear and piston scuffing and improve the wear characteristics in any engine, even under extreme conditions. This oil is not recommended as a “break-in oil” for any Air Cooled V-Twin and should not be mixed with petroleum based oils. When switching to Ultima Full Synthetic Oil , change oil and filter for a complete fluid change. Exceeds all known motorcycle manufacturer’s warranty requirements including API SF,SG,SH,SL and JASO MA and does not void new vehicle warranty. Check manufacturer’s recommendation for viscosity and change interval. This Oil is recommended by Ultima for protection AFTER break in periods on all Ultima Brand Engines. #103115 Ultima Oil 20W50 Full Synthetic SOLD EACH/CASE BOX IS 12PC
ULTIMA PREMIUM 80W90 GEAR OIL $6.86 EA. Ultima 80W90 Gear Oil is our mineral based general purpose gear oil for use in all on and off road gear box applications. We recommend this oil in all Ultima transmissions for break-in and continued GL-3 service where mineral based lubricants are recommended or preferred. Recommended for use in all major transmission, final drive and gearboxes requiring API GL-3 service classification or US Steel 224, AGMA 9005 EP or Cincinnati Machine approvals. Check manufacturer recommendations for viscosity and change interval. This Oil is recommended by Ultima for protection in all Ultima Brand Transmissions during break-in. #103116 Ultima 80W90 Gear Lube SOLD EACH/CASE BOX IS 12PC	ULTIMA RACING 80W140 GEAR OIL $14.99 EA. Ultima Full Synthetic Transmission Oil is designed for use in all manual transmissions where the clutch uses a separate lubricant. This is a highly effective and efficient lubricant designed for extended use and maximum performance. We strongly recommend this oils use after Transmission break in for Maximum component performance and life. This Heavy Duty Gear lubricant specially engineered for extended use in manual transmissions where API GL-4, GL-5, MT-1 and MIL-L-2105D are specified. Additional specific applications are Mack GO-J Plus, SAE J 2360, Navistar TMS 6816, Dana Spicer SHAES256, Eaton PS-163, Arvin Meritor TP-9539. Check manufacturer’s recommendation for viscosity and change interval. This Oil is recommended by Ultima for protection in all Ultima Brand Transmissions . Not for use in wet clutch applications. #103117 Ultima 80W140 Full Synthetic Gear Lube SOLD EACH/CASE BOX IS 12PC
DOC BAILEY’S LEATHER BLACK The Original Doc Bailey's Leather Black contains a dye pigment that restores lost colour. It also cleans, nourishes and waterproofs. Doc Bailey's Leather Black gently cleans leather with specially formulated detergents which actually lift dirt out, opening the pores of the leather allowing the lanolin oil to flow into the leather nourishing and softening it. It penetrates deep into the leather to restores lost colour. As a finishing touch, special waxes lock the colour in which protects and waterproofs your leather. #103260 Doc Bailey’s, 8.8 oz bottle w/applicator. $17.25 SOLD EACH #103261 Doc Bailey’s, single use packets in prepacked display. Contains 50 packets. $39.33 50 PER BOX
		BLACK GEM ENGINE CALL OR EMAIL FOR DETAILS
CLICK HERE TO GO TO MAIN INDEX	CLICK HERE TO RETURN TO HARDWARE PAGE#1	CLICK HERE TO RETURN TO HOME PAGE

CLICK HERE TO GO TO HARDWARE PAGE #3 FASTERNERS

Use of the word Harley-Davidson®, various model names and designations, and OEM part numbers are provided solely for reference and application information and there is no affiliation between Harley-Davidson®, Inc. and Island Choppers.